-40%
White Birch wood veneer 24
White Birch wood veneer 24
White Birch wood veneer 24
White Birch wood veneer 24
White Birch wood veneer 24
White Birch wood veneer 24
White Birch wood veneer 24
White Birch wood veneer 24
White Birch wood veneer 24
White Birch wood veneer 24
White Birch wood veneer 24
White Birch wood veneer 24

White Birch wood veneer 24" x 96" with peel and stick PSA adhesive 1/40 thick

$ 31.67

Availability: 128 in stock
  • Brand: White Birch wood veneer PSA paper backing adhesive
  • Item must be returned within: 30 Days
  • Restocking Fee: No
  • Refund will be given as: Money back or replacement (buyer's choice)
  • All returns accepted: Returns Accepted
  • Birch White wood veneer PSA paper backer: Flat Cut grain 3M 468 peel stick roll flexible F/C
  • Condition: New
  • Veneer Cut: Plain Sliced
  • Item Type: Veneer Sheet
  • Veneer Type: Paper Backed
  • Model: Wood veneer peel and stick 3M 468 self apply roll
  • Wood Type: Birch
  • Return shipping will be paid by: Buyer
  • MPN: Flat Cut Birch 1/40" thickness thin flexible F/C

    Description

    White Birch wood veneer 24" x 96" with peel and stick PSA adhesive 2' x 8' x 1/40" thickness. The adhesive is already on the product. Simply peel back the liner and apply to a clean smooth surface. Paper backer is also on all veneer products with adhesive to make it flexible and hold the veneer together. Pictures are representative of the product you would actually receive which will vary in color and grain since this is a natural product. Some pictures may be of other sizes, customer projects and wet or finished veneer. Ships rolled in long narrow box with application instructions. Scraper application tool also available and shown in last photo. Only high quality 3M adhesive used. Very convenient and durable product that avoids the mess and smell of contact cement.
    Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
    Other backers and sizes and unbacked veneer may be available.
    About pictures
    :
    Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.
    Backed products
    come with complete application instructions
    that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.
    Thickness
    :
    (will not always be exactly correct, but relatively close)
    Paper-backed veneers = 1/40”
    Wood-backed veneers = 1/25”
    Raw plain veneer with no backing = 1/32”-1/42”
    How to cut
    :
    generally cut with a razor/box knife or similar tools and some type of straight edge.
    How to apply
    :
    Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
    How to finish
    :
    most any conventional finishing products can be used with veneer that is applied correctly.
    Disclaimer:
    Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.
    Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.