Tektronix AM5030 Current Probe Amplifier Plug In

Description

This is a Surplus Auction
See special considerations:
This auction is for surplus inventory.
All sales are final.
These are excess units we have in inventory that we are looking to liquidate as we haven't the time or parts to service them. See the description to the right for more details.
Auction Terms
California Sales Tax applies to CA residents
Personal or Company Check (will delay shipment until check clears)
Certified Funds (Sameday shipment)
PayPal ~ Online Payment Option
Tektronix AM5030
Current Probe Amplifier
Serial No: B020897
Unit powers on and is untested. Unit is missing the side panel secure tab and front panel output knob is broken off. Sold as-is Please see pictures.
Repair Determination:
Side panel securing tab is missing
Output DC level knob is broken off
Available Documents:
Instruction Manual
Reference Guide (08/97)
Data Sheet (10/98)
*Return Policy*
All units sold will have
void seals attached
. Please verify your unit matches the description in the auction prior to opening units to attempt any repairs.
No returns
will be approved for buyers who have
broken the void seals
. A picture of intact void seals will be required.
Manufacturer Description:
The AM5030 Current Probe Amplifier with General Purpose Interface Bus (GPIB) adds programmability to the versatile AM503B. The AM5030 enables you to use automated techniques to make wide bandwidth AC/DC current measurements. The AM5030 is a TM5000 single-wide module that plugs into a 3-slot TM5003 power module mainframe. While the non-programmable AM503B will operate in either a TM500 or TM5000 power module mainframe, the AM5030 works only in a TM5000 mainframe. The AM5030 uses A6312, A6302, A6303 and the XL Series of current probes and connects to any scope or analyzer via a BNC cable. Like the AM503B, the AM5030 does not have to be calibrated with specific current probes. This is a tremendous operational improvement over the older AM503 Systems. The AM5030 and AM503B also provide several improvements over the AM503A, including a faster Degauss/self-calibration cycle and more responsive, reliable front-panel controls. The AM5030 uses the IEEE-488.1 bus standard. Using a simple command set, you can configure and confirm the settings of the amplifier or read the instrument's serial number. You can determine whether the current probe is open or closed, use bus commands to initiate a self-test or force a probe Degauss and DC balance operation. The AM5030 bus address is set through the front panel and the address is retained when power is removed. The AM5030 does not require an external controller to operate. It can be completely controlled using the front panel; however, when used with a controller, the front panel can be disabled to prevent manual operator adjustments.
Performance Characteristics
Form Factor Benchtop
Programmability/Connectivity
User Interface Proprietary
Compliance
CE Compliance Not on file
UL Compliance Not compliant
Power Requirements
Input Power Not required
National Test Equipment, Inc.
1935 Plaza Real Oceanside, CA 92056