-40%
Pimento Pepperwood Burl wood veneer 33
Pimento Pepperwood Burl wood veneer 33
Pimento Pepperwood Burl wood veneer 33
Pimento Pepperwood Burl wood veneer 33
Pimento Pepperwood Burl wood veneer 33
Pimento Pepperwood Burl wood veneer 33
Pimento Pepperwood Burl wood veneer 33
Pimento Pepperwood Burl wood veneer 33

Pimento Pepperwood Burl wood veneer 33" x 28" raw no backing 1/64" thickness

$ 25.08

Availability: 19 in stock
  • Pimento Pepperwood Burl wood veneer raw: Flitch sample sheet sequence match grain cut AA
  • Item must be returned within: 30 Days
  • Condition: New
  • Restocking Fee: No
  • Model: Pepperwood Burl sequence matched sample flitch AA
  • MPN: Does Not Apply
  • UPC: Does not apply
  • Brand: Pimento Nogal Burl wood veneer sheet raw unbacked
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Return shipping will be paid by: Buyer

    Description

    Pimento Pepperwood Nogal Burl wood veneer 33" x 28" raw no backing 1/64" thickness AA quality grade. Burls typically will have holes, voids or cracks that need filled. Not many holes but obvious voids in this one, but the product isn't "square" (as shown). You could cut a clear square section that would be approximately 30" x 16" or 16" x 30".
    ONE piece per price
    even though a bundle may be shown in picture. All pieces will come from this bundle and be in sequence. Each sheet carefully inspected and packaged. Ships flat, so the package is thin and large. Bundle # 31
    Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
    *SPECIAL NOTE ABOUT PICTURES:
    *You are buying what is in two first photos. All other pictures are finished samples and customer pictures from same log.
    Visit My eBay Store: JSO Wood Products
    Other sizes and backed veneer may be available.
    Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
    Visit My eBay Store: JSO Wood Products
    About pictures
    :
    Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.
    Backed products
    come with complete application instructions
    that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.
    Thickness
    :
    (will not always be exactly correct, but relatively close)
    Paper-backed veneers = 1/40”
    Wood-backed veneers = 1/25”
    Raw plain veneer with no backing = 1/32”-1/42”
    How to cut
    :
    generally cut with a razor/box knife or similar tools and some type of straight edge is typically used.
    How to apply
    :
    Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
    How to finish
    :
    most any conventional finishing products can be used with veneer that is applied correctly.
    Disclaimer:
    Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.
    Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.