Burma Teak composite wood veneer 7.75" x 9.5" raw no backing 1/42" thickness

Description

Burma Teak composite wood veneer 7.75" x 9.5" raw veneer (open grain) no back 1/42' thickness. (Dean # 2T 111/FA2-30).
Most any white or yellow wood glue adhesive will work. Pressure must be applied in some manner with clamps or some sort of weight on top.
Composite wood veneer is just like any other wood veneer as far as laminating and finishing. It is real wood that is engineered and manipulated for consistent color and grain appearance.
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
Visit My eBay Store: JSO Wood Products
Other sizes and backed products may be available.
About pictures
:
Most pictures have been temporarily wet with denatured alcohol on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments may have been made to show the color as true as possible. A lot of time and effort is spent on picturing accurately.
Backed products
come with complete application instructions
that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.
Thickness
:
(will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40”
Wood-backed veneers = 1/25”
Raw plain veneer with no backing = 1/32”-1/42”
How to cut
:
generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply
: