-40%
Ash wood veneer 48
Ash wood veneer 48
Ash wood veneer 48
Ash wood veneer 48
Ash wood veneer 48
Ash wood veneer 48
Ash wood veneer 48

Ash wood veneer 48" x 96" with paper backer 1/40'' thickness A grade quality

$ 39.6

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Restocking Fee: No
  • Condition: New
  • Ash Flat Cut wood veneer sheet: Paper backer roll woodgrain American flexible roll
  • UPC: Does not apply
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Model: Wood veneer flexible American Ash thin backing F/C
  • Brand: Ash Flat Cut wood veneer sheet paper backer roll
  • MPN: Does Not Apply

    Description

    Ash wood veneer 48" x 96" with paper backer 4' x 8' x 1/40" thickness A grade quality.
    Photos are representative of the actual product and will vary in color and grain since this is a natural product. Ash is a light yellowish color and will darken some when finished as can be seen in wet photos. Some pictures may be of other sizes, wet or finished veneer or customer projects. Count on quality. Ash often has worm tracks, but these should be minimal in this grade. Application instructions included. Ships in long narrow box.
    Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
    Visit My eBay Store: JSO Wood Products
    Other sizes, backers, and unbacked veneer may be available.
    About pictures
    : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.
    Backed products
    come with complete application instructions
    that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.
    Thickness
    : Paper-backed veneers are generally 1/40” and wood-backed veneers are 1/25”. Raw plain veneer with no backing is about 1/32”-1/42”.
    How to cut
    : generally cut with a razor knife or similar tools and some type of straight edge.
    How to apply
    : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
    How to finish
    : most any conventional finishing products can be used with veneer that is applied correctly.
    Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.