African Mahogany wood veneer sheet 48" x 120" on wood backer A grade 1/25" thick

Description

African Mahogany 48" x 120" on wood backer (4' x 10' x 1/25" thickness). "A" quality grade. Photos are representative of the product which will vary in color and grain since this is a natural product. This is the main commercially sold Mahogany in the U.S. Color range can be light pinkish to darker maroon/violet. Most stock is lighter in color. Mahogany will darken when finish is added to it.
Considered flat cut which means open or wide grain. Some photos show other sizes and wet or finished veneer. These photos are offered to show the color and grain as it may be under finish. Most photos are closer up views. This product is unfinished. Some prefer wood backer over paper backer because it is thicker and may cover some minor imperfections in the surface that the product is applied to. Backer is Okuome Mahogany and blends perfectly. Each sheet carefully inspected and packaged by our company. Many sellers are drop shipping the product without ever seeing it. Expect quality.
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
Visit My eBay Store: JSO Wood Products
Product comes with complete application instructions that are simple and clear. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.
Thickness
: Paper-backed veneers are generally 1/40” and wood-backed veneers are 1/25”. Raw plain veneer with no backing is about 1/32”-1/42”.
How to cut
: generally cut with a razor knife or similar tools.
How to apply
: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
How to finish
: most any conventional finishing products can be used with veneer that is applied correctly.